Thursday, May 31, 2012

One Bad Cook



This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.

All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com.



SUPPLIES NEEDED

Tube and close up of choice. 
I am using artwork  by Celinart Pinup. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube here

Scrapkit PTU Bad Cook by Celineart Pinup.  
You can purchase this kit here.

Template of choice or you can use the one I used. Template159 by Kristin here

Font of choice. 
Filters needed: 
eye candy4-gradient glow-not required used for name

Don't forget to save often.

LET'S GET STARTED

Open template, shiftD to duplicate, close original. Delete the following layers credits, wordart, right star, right star back, left star, left star back, and pixel words 

Instructions for coping and pasting. 
Activate the layer. 
Selections-select all-float-defloat-selections-invert, active paper or tube layer and hit delete. 
When you see C/P in the tut that means Copy and Paste.
Add drop shadow as desired. See my tag for exact placement.

Copy and paste desired papers into each layer.  Then delete the original layers. 

Change the color of the dotted squares to match the color of your tube, use two different colors.

Activate glitter circle, selections, select all, layers new raster layer, flood fill with a color from your tube. Select none, adjust, add/remove noise, add noise, guassian25 monochrome checked, do this again.

I used paper2 for right square2 and left square2

Paper8 for left circle2

Paper3 for right circle2 and left circle1

Paper7 for right circle1

Activate large circle2, selections, select all, float, defloat, invert, c/p close up tube move to the left of the circle, hit delete. Select none. Change the blend mode to Luminance(L) in the layers palette.

C/P your main tube place on the right side of large circle2

C/P elements of choice or use mine below. See my tag for exact placement.

smoke place behind your tube

seige02 resize75% place on the right side of your tube

cuilliers resize55% place  at the top on the right side

iceskull resize55% place on the left side a bit towards the middle

bow rotate right 30 degrees place at the bottom

bow black place beside bow

lipstick resize20% place at the bottom

cupcake resize65% place at the bottom on the left of the lipstick

american resize65% rotate left 30 degrees place on the right side of the seige

ribcage place at the top on the left side

Crop merged opaque.

Merge visible. Re-size to desired size. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on May 31, 2012

Bad Cook




This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.

All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com.



SUPPLIES NEEDED

Tube and close up of choice. 
I am using artwork  by Celinart Pinup. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube here

Scrapkit PTU Punky Pink by Stef's Scrapkits.  
You can purchase this kit here.

Mask of choice

Font of choice. 
Filters needed: 
eye candy4-gradient glow-not required used for name

Don't forget to save often.

LET'S GET STARTED

Open a new image 700x700, we will re-size later.

Instructions for coping and pasting. 

Activate the layer. 
Selections-select all-float-defloat-selections-invert, active paper or tube layer and hit delete. 

When you see C/P in the tut that means Copy and Paste.
Add drop shadow as desired. See my tag for exact placement.

C/P element10 resize85% place in the middle of the tag. Using your magic wand click inside of the frame, selections modify expand by5, c/p paper of choice,  I used paper10 resized 75%. Selections-invert, hit delete. C/P close up of tube, hit delete.  Select none, move under the frame layer, add drop shadow to the frame. Duplicate your tube layer, on the top tube layer, adjust blur, guassian blur 3, change blend mode to soft light, on the bottom tube layer add a drop shadow.

C/P your main tube and move to the right side.

C/P elements of choice or use mine below. See my tag for exact placement.

element30 resize30% place on the right at the top of the frame

element28 resize40% place on the left at the top of the frame

element46 resize75% place on the left at the top of the frame over the top of the charm

element25 resize40% place at the bottom on the left side

element31 resize40% place over the bag

element09 resize45% place beside the bag and lipstick move under the lipstick layer in the layers palette

element12 resize55% place beside your close up tube on the right side, using your magic wand, click inside the top frame, expand by 5, add a new raster layer and flood fill with color of choice or the one I am using #f14298 move under your frame, now grab your tube and place a part of it in the frame, invert and delete, change the blend mode to screen, do the same for the bottom frame but change the blend mode to luminance(L) add drop shadow to frame

element17 resize40% place beside the bottle

element7 resize45% rotate left 30 degrees

merge visible resize85%

add a new raster layer flood fill with color of choice or the one I am using I am using black send to bottom apply mask, merge group, center it

Crop merged opaque.

Merge visible. Re-size to desired size. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on May 31, 2012

Tuesday, May 29, 2012

Spidergirl



This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com.


SUPPLIES NEEDED

Tube of choice.
I am using artwork  by Elias Chatzoudis. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube here

Scrapkit PTU Spidergirl by Pinkcandydesigns.  
You can purchase this kit here.



Font of choice. Buring
Filters needed: 
eye candy4-gradient glow-not required used for name

Don't forget to save often.

LET'S GET STARTED

Open a new image 700x700, we will re-size later.

When you see C/P in the tut that means Copy and Paste.
Add drop shadow as desired. See my tag for exact placement.

c/p frame2 resize80% click inside of it using your magic wand selections-modify-expand by 4, c/p paper7
selections-invert-hit delete, deselect

c/p your tube place to the right of your frame

C/P elements of choice resize to your liking, or use mine below. See my tag for exact placement.

C/P spider and web2 resize place in the left corner of your frame, carefully erase any web outside of the frame

cane place on the left side of the frame

cityscense resize, duplicate, arrange it so that they are covering the bottom of the tag, move the one of the left above your tube layer in the layers palette and the one on the right under your tube layer

c/p from left to right-resize to your liking

goblet

candle

cake

crow

hat move under your crow in the layers palette

ribbon and ribbon2

berries2 place on the left side send to bottom layer place so that part of it is showing from behind the frame, duplicate, mirror

glitter move towards the top of the frame so that part of it is showing from behind the frame

Crop merged opaque.

Merge visible. Re-size to desired size. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on May 29, 2012

Saturday, May 26, 2012

Darkness


This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com.


SUPPLIES NEEDED

Tube of choice.
I am using artwork  by Arthur Crowe. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube here

Scrapkit PTU Lonely Nights by Bibis Collections.  
You can purchase this kit here.

Mask452 by Vix

Font of choice. 2Peas My Muse
Filters needed: 
eye candy4-gradient glow-not required used for name

Don't forget to save often.

LET'S GET STARTED

Open a new image 700x700, we will re-size later.

Instructions for coping and pasting. 

Activate the layer. 
Selections-select all-float-defloat-selections-invert, active paper or tube layer and hit delete. 

When you see C/P in the tut that means Copy and Paste.
Add drop shadow as desired. See my tag for exact placement.

Using you magic wand click inside your image c/p into selection paper5. Apply mask. Merge group, duplicate. Merge down.

C/P your tube place to your liking. I put my to the left of my mask layer.

C/P elements of choice or use mine below. See my tag for exact placement.

element30 resize50%

element6 resize65%

element57

element50 resize50%

element61 resize50%

element47

element39

element46 resize50% mirror

Crop merged opaque.

Merge visible. Re-size to desired size. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on May 26, 2012

Lemon


This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com.


SUPPLIES NEEDED

Tube of choice.
I am using artwork  by Robert Alvarado. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube here. This tube is a Limited Edition.

Scrapkit PTU LemonFaire by Inzpired Creationz.  
You can purchase this kit here.



Font of choice. 2Peas My Muse
Filters needed: 
eye candy4-gradient glow-not required used for name

Don't forget to save often.

LET'S GET STARTED

Open a new image 700x700, we will re-size later.

Instructions for coping and pasting. 

Activate the layer. 
Selections-select all-float-defloat-selections-invert, active paper or tube layer and hit delete. 

When you see C/P in the tut that means Copy and Paste.
Add drop shadow as desired. See my tag for exact placement.

C/P frame2 resize75% place in the middle of the tag. Using your magic wand click inside of the frame, selections modify expand by5, c/p paper of choice,  I used paper7. Selections-invert, hit delete. C/P close up of tube, duplicate, close off the duplicated layer, click on the original tube hit delete.  Select none, move under the frame layer, add drop shadow to the frame. Move the duplicated layer to the top and open it back up, erase the part of the tube that you don't want showing outside of the frame.

C/P elements of choice or use mine below. See my tag for exact placement.

lemon topiary place on the left side

umbrella and chair place on the right side

table1 resize50% place on the left side

lemonade resize25% place on the table

lemon resize25% again 55% place on the table

cupcake resize25% again 75% place on the table

flowerspary4 resize75% place behind the umbrella

sparkles1 mirror place over your tube

Crop merged opaque.

Merge visible. Re-size to desired size. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on May 26, 2012