Sunday, June 30, 2013

VIP Girl

 
 
This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.

All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!


I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com




SUPPLIES NEEDED:


Tube of choice.
I am using artwork by Zlata_M
A PTU Artist. You must purchase and obtain a license to use.
You can find Zlata_M's tubes at SATC.
 You can get this tube here.



Scrapkit of Choice:
Scrapkit PTU Festive Evening by Skyscraps Designs.
  Which you can get SATC
You can find this kit here

Font of choice.
 
Mask of Choice:
I used WSL_411 which you can get here

Filters needed:
eye candy4-gradient glow-used for name


Don't forget to save often!



LET'S GET STARTED


Open a new image 700x700
 
c/p element27  resize85% using your magic wand click inside frame
selections-modify-expand by 5. c/p paper4, selections-invert-hit delete
c/p your tube, place on the left side hit delete, c/p tube again move down and on the right side, hit delete, c/p tube again place in the center, hit delete
move paper and tubes under the frame layer. change the layer opacity of tube layers to 80-90%, i did each one a little different


c/p element55 resize25% place at the top on the right side
 
c/p tube center

c/p element11 resize35%, mirror, place at the bottom on the left side of your tube

c/p element79  resize35% place at the bottom on the left side of your tube down and a little to the right of the roses

c/p element48 resize35% rotate left 15 degrees, place at the bottom on the left side of the tube down and to the left of the dog

c/p element12 resize35% place at the bottom on the left side of the tube down and a little to the right of the letter

c/p element73 resize25% place at the bottom on the left side of the tube down and to the right of the heart box

c/p element1 resize75% place at the bottom to the right of the tube

c/p element68 resize45% place at the bottom on the right side of the tube, about middle of the camera stand

c/p element28 resize45% place at the bottom to the right of the tube below the wordart

c/p element59 resize25%, rotate left 15 degrees, place at the bottom to the right of the tube over the beads

c/p element81 resize25% place to the right of the bottle
 
c/p element52 resize35% rotate right 15 degrees, place to the right of the money
 
c/p element5 resize45% place to the right of the glass
 
c/p element7 resize45% rotate right 15 degrees place above the movie reels

crop merged opaque merge visible, resize90%

layers, new raster layer, flood fill with color from tag, send to bottom, apply mask, merge group

Merge visible

Add name or saying of choice

Add proper copyright info and save as .png

Thanks for trying my tutorial. I hope you enjoyed it.
This tutorial was written on June 30, 2013

Saturday, June 29, 2013

Dream

 
 
This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.


All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!



I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com






SUPPLIES NEEDED:



Tube of choice.

I am using artwork by Zlata_M
A PTU Artist. You must purchase and obtain a license to use.
You can find Zlata_M's tubes at SATC.
 You can get this tube here.





Scrapkit of Choice:

Scrapkit PTU Pretty Poison by Inzpired Creationz 
  You can find this kit here


Font of choice.

Mask of Choice:
I am using WSL_345 which you can get  here
 
Filters needed:

eye candy4-gradient glow-used for name



Don't forget to save often!




LET'S GET STARTED



Open a new image 583x600

  c/p paper11 apply mask, merge group, center

bridge place at the bottom

clouds resize75% place towards the top on the right side, duplicate, mirror and move down, arrange under the bridge layer in the layers palette

scattered birds resize75% place over the clouds to your liking

lamp post resize55% place at the end of the bridge on the left side, duplicate and move to the right side of the bridge

owl resize55%, mirror place on the left side of the bridge towards the front of it

boat resize35%, mirror place on the right side of the bridge, so that it looks like it is coming out from under it, i erased the back end of the boat

grass3 resize85% arrange under your bridge layer in the layers palette, place so that it looks like the boat is sitting on it, duplicate, mirror

pandora's box resize35% place on the right side towards the front of the bridge
 
c/p your tube place on the front of the bridge, arrange under the owl layer in the layers palette
 
back on top layer

grass1 place at the bottom to the right

grass2 resize55% place at the bottom on the left

flower4 resize25% sharpen place in front of pandora's box, arrange under grass1 layer in the layers palette, duplicate, bring to top and place towards the front of the boat on the grass
 
Merge visible


Add name or saying of choice


Add proper copyright info and save as .png


Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on June 30, 2013


Friday, June 28, 2013

Pampered Bad Girl

 
 
This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.


All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!



I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com






SUPPLIES NEEDED:



Tube of choice.

I am using artwork by Wendy Gerber
A PTU Artist. No license is needed but credited as follows: ©WendyGerber www.bywendygstore.com 
 You can get this tube here.





Scrapkit of Choice:

Scrapkit PTU Pampered Pup by Inzpired Creationz 
  You can find this kit here


Font of choice.

Mask of Choice:
 
Filters needed:

eye candy4-gradient glow-used for name



Don't forget to save often!




LET'S GET STARTED



Open a new image 583x600

  c/p frame3 resize75% rotate 90 degrees, using your magic wand click inside the frame
selection-modify by 5 c/p paper12, selections-invert hit delete
c/p tube duplicate, close duplicate, click on original hit delete
select none, move tube and paper under frame
click on duplicate bring to top and erase anything outside the
bottom of the frame
 
 
c/p bow1 resize45% place at the top on the left side


from left to right add these elements at the bottom of the frame:
 
lips3 resize45%
pearls 1 place at the bottom
polish resize45%
blush resize65%
shoe2, mirror resize45%
pillow resize55%, rotate right 15 degrees, arrange under the polish layer

back to top layer

 cupcake3 resize35%
  cocktail resize55%
diamond resize75%, arrange under the cocktail layer

back to top layer

brush resize75%, mirror
 
c/p paper 9, send to bottom, apply mask, merge group
 
Merge visible

Add name or saying of choice

Add proper copyright info and save as .png

Thanks for trying my tutorial. I hope you enjoyed it.
This tutorial was written on June 28, 2013


Bad Girl

 
 
This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.


All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!



I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com






SUPPLIES NEEDED:



Tube of choice.

I am using artwork by Ismael Rac
A PTU Artist. You must purchase and obtain a license to use.
 You can get this tube here.





Scrapkit of Choice:

Scrapkit PTU Insania Misfit by Kandii Popz which is part of Xerax's 2013 Collab Party
  You can find this kit here


Font of choice.

Mask of Choice:
 
Filters needed:

eye candy4-gradient glow-used for name



Don't forget to save often!




LET'S GET STARTED



Open a new image 583x600

  c/p frame2 resize75% using your magic wand click inside the frame
selection-modify by 5 c/p paper9, selections-invert hit delete
c/p tube duplicate, close duplicate, click on original hit delete
select none, move tube and paper under frame
click on duplicate bring to top and erase anything outside the
bottom of the frame
 
 
c/p skull1 resize45% place at the top on the left side

spiked ball resize65% place at the top hanging from the skull

cherries resize45% place at the top on the right side
from right to left add these elements at the bottom of the frame:
ribbon2 resize65%
skullroses resize65%
cocktail resize65%
bottle resize55%
cuppy resize40%
nail polish resize35%
dice1 resize50%
 splats center move to the right side, send to bottom, duplicate, mirror
 
c/p paper 14, send to bottom, apply mask, merge group
 
Merge visible

Add name or saying of choice

Add proper copyright info and save as .png

Thanks for trying my tutorial. I hope you enjoyed it.
This tutorial was written on June 28, 2013


Kelsie

 
 
This tutorial was written for those who have a working knowledge of psp.

I use paint shop 9, but any version should work.


All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!



I am always interested in seeing what you create using my tuts. You can send your results to me at lynnkitten101@gmail.com






SUPPLIES NEEDED:



Tube of choice.

I am using artwork by PinupBombshells
A PTU Artist. You must purchase and obtain a license to use.
You may find PinupBombshells's tubes at SATC.
 You can get this tube here.





Scrapkit of Choice:

Scrapkit PTU Kelsie Kat by Design by Joan.
  You can find this kit here


Font of choice.

Mask of Choice:
I used WSL_152 which you can get here
 
Filters needed:

eye candy4-gradient glow-used for name



Don't forget to save often!




LET'S GET STARTED



Open a new image 700x700

  c/p element62 using your magic wand click inside the frame
selection-modify by 5 c/p paper5, selections-invert hit delete
c/p tube duplicate, close duplicate, click on original hit delete
select none, move tube and paper under frame
click on duplicate bring to top and erase anything outside the
bottom of the frame
 
 
c/p element5 resize55% place at the bottom on the left side

element47 resize65% place at the bottom in front of the bag

element21 resize45% place at the bottom in front of the ribbon

element24 resize45% rotate right 25 degrees, place at the bottom to the right of the polish, arrange under the ribbon layer in the layers palette

back on top layer c/p element22 resize45% mirror, place to the right of the polish, in front of the lips

element1 resize45% place at the bottom to the right of the bag, arrange under the lips layer in the layers palette

element72 resize35% place to the right of the skull rose
 
element41 resize65% mirror, place in front of the cupcake and to the right a little

element70 resize45% place to the right of the shoe

element28 resize65% place behind the ice cream and to the right a little

element85 place to your liking over your tube
 
c/p paper 14, send to bottom, apply mask, merge group
 
Merge visible

Add name or saying of choice

Add proper copyright info and save as .png

Thanks for trying my tutorial. I hope you enjoyed it.
This tutorial was written on June 28, 2013