Saturday, April 28, 2012

Purple Goth





This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!

SUPPLIES NEEDED

Tube of choice.
I am using artwork by Tony Tzanoukakis. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube from here.

Scrapkit PTU Star Gothique  by PinkCandyDesigns  You can purchase this kit at SATC(Scraps And The City) here


Font of choice. I used Twilight New Moon
Filters needed:

eye candy5-impact-gradient glow(not required)used for name

Don't forget to save often.

LET'S GET STARTED

Open new image 700x700.
When you see C/P in the tut that means Copy and Paste.

C/P frame2 re-size80%. Using your magic wand click inside  the frame. Selections-modify-expand by 6. C/P paper of choice or the one I used paper4. Selections-invert-hit delete. C/P close up of tube. Duplicate tube, close duplicated tube. Click on tube layer, hit delete. Move paper and tube to bottom layer. Select none. Click on duplicated tube in your layer palette move to top layer. Erase the bottom part of the tube so that only her head is coming out of the frame.

C/P hearts place on bottom layer move towards up, duplicate flip.

C/P kitty re-size60% move to top layer place bottom left of frame.

C/P glitter re-size120% send to bottom.

C/P ribbon2 mirror place under the kitty.

C/P beads re-size75% place top right of frame.

C/P bow3 re-size50% place at the top of the beads.

C/P candle re-size50% place bottom right of frame.

C/P glass re-size50% place on the left side of the candle move down in layer palette.

C/P bottle re-size40% place on the right side of the candle.

C/P cupcake2 re-size40% place on left side of kitty.

C/P cupcake3 re-size30% place on other side of cupcake.

C/P lolli re-size40% rotate left 25 degrees, sharpen. Move behind the cupcakes layer.

C/P lolli re-size40% place beside first lolli.

C/P lips re-size40% rotate left 35 degrees place upper left of frame.

Crop merged opaque. Merge visible. 

 Re-size is needed, mine didn't need it. Mine is 574x545. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

For the banner.
 New image 600x250.

C/P paper4, crop merged opaque.

C/P tube place left side of image. Duplicate, mirror place right beside your original. Change opacity to 70%. 

Grab you rectangle tool. Square width 8 foreground color from tube background none. Draw out square. Convert to raster.

Using you magic wand click inside the frame we just made, selections modify, expand by 6. C/P close up of tube place which part you want showing in frame, selections, invert, hit delete. Selections, select none. Move tube under frame. 

Click on your frame layer. Add drop shadow and merge down. Rotate right 35 degrees. Move to the right of image.

C/P glass re-size50% place on left corner of frame. 

C/P bottle re-size30% place beside glass.

Add any other elements you might want.

Click on top layer. Add new raster layer. Selections, select all, flood fill with color of choice I used #5f3887, modify, contract by 5, hit delete. Leave selected, add new raster layer, flood fill with black, modify, contract by 3, hit delete. Leave selected, add new raster layer flood fill with a lighter color then your first one I used #c08be9, modify, contract by 3, hit delete. Select none. Crop merged opaque. Shift D, to duplicate for the avatar. Merge visible.  Add name or saying of choice. 

Add proper copyright info and save as .png

For the Avatar.  
Crop duplicated banner to 150X150 by clicking on your crop tool and change width and height to 150. Move the  the square over your tube. Crop. Delete all layers except your bg and tube. Add new frames using the same technique we did for the banner.

Crop merged opaque. Merge visible. Add name or initials of  choice. 

Add proper copyright info and save as .png

This tutorial was written on April 28, 2012


I would love to see what you create using my tuts, if you would like to share please email me your results at lynnkitten101@gmail. com , you never know if yours will get posted.

Friday, April 27, 2012

Spring Desires


This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!

SUPPLIES NEEDED

Tube of choice.
I am using artwork by VeryMany. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube from SATC here.

Scrapkit PTU Spring Desires  by Eclipse Creations and can be purchased here

Mask212 by Insatiable Dreams Masks and can be found HERE. Last download called Masks7

Font of choice. I used Take and Give
Filters needed:

eye candy5-impact-gradient glow(not required)used for name

Don't forget to save often.

LET'S GET STARTED

Open new image 700x700.
When you see C/P in the tut that means Copy and Paste.

C/P frame4 re-size85%. Using your magic wand click inside left side of the frame. Selections-modify-expand by 8. C/P paper of choice or the one I used paper1 re-size80%. Selections-invert-hit delete. C/P close up of tube. Change blend mode to soft light or one to your liking. Selections-select none. Move under the frame. Do the same for the right side of the frame. Merge visible.

C/P main tube place in middle of frame.

C/P grass3 place bottom of tag, at bottom of main tube.

C/P leaves place under grass3. Duplicate place duplicate over the frame.

C/P curious swag place under grass3.
C/P frog re-size70% bring to top layer place at the bottom right of the grass.

C/P flowerpot re-size70% then again 80% place top left of grass.

C/P Swirly tree2 re-size80% place behind the flowerpot.
C/P sparkle8 bring to top. Place to your liking.

Crop to size. Merge visible. Re-size85%. Layers-new raster layer. Flood fill with color of choice, apply mask. Merge group. Merge visible. Crop to size.

 Re-size to desired size. Mine is 600x553. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on April 27, 2012


I would love to see what you create using my tuts, if you would like to share please email me your results at lynnkitten101@gmail. com , you never know if yours will get posted.

Tuesday, April 24, 2012

Forever


This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!

SUPPLIES NEEDED

Tube of choice.
I am using artwork Isamel Rac. A PTU Artist. You must purchase and obtain a license to use his work. You can purchase his tubes here.

Scrapkit PTU Forever Friends by   DivaDesignz and can be purchased here

Font of choice. I used Gretoon Highlight
Filters needed: none
eye candy5-impact-gradient glow(not required)used for name

Don't forget to save often.

LET'S GET STARTED

Open frame1 re-size30%, rotate left 90 degrees.
Using you magic wand click inside the first square of the frame. Selections modify expand by 6 C/P close up of tube place the part you want in the frame. Selections invert hit delete. Selections-select none. Place layer under your frame. Do the same for the other 2 squares. Add drop shadow to the frame.

Copy and paste bow1 re-size10% place on the middle square.  Then delete the original layers. Add drop shadow of choice.

Copy and paste flower2 re-size10% place over the flower button part of the frame. Copy and paster flower1 re-size10% then re-size90% place under flower2 duplicate and place on the other side of flower2.

Copy and paste ribbon4 re-size30% place on bottom layer arrange towards top of frame to the right. Copy and paste ribbon3 re-size30% flip place to the left bottom of the frame.

Crop merged opaque.

Merge visible. Re-size to desired size. Mine is 591 x 421. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on April 24, 2012


I would love to see what you create using my tuts, if you would like to share please email me your results at lynnkitten101@gmail. com , you never know if yours will get posted.

Saturday, April 21, 2012

Attitude










This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!

SUPPLIES NEEDED

Tube of choice.
I am using artwork ZlataM. A PTU Artist. You must purchase and obtain a license to use. You can purchase this tube from The PSP Project here.   

Scrapkit PTU MobstersIII by Purples Kreationz.  You can purchase this kit at SATC(Scraps And The City) here      

Template150 by Toxic Desirez/Kristin and can be found here

Font of choice. I used Diamond Gothic
Filters needed: none
eye candy5-impact-gradient glow(not required)used for name

Don't forget to save often.

LET'S GET STARTED

Open template. Shift D, close the orginial. 

Delete credits, words, star left 1 &2, star right 1 & 2, sn stars, and background.

Instructions for coping and pasting. 

Activate the layer. 
Selections-select all-float-defloat-selections-invert, active paper or tube layer and hit delete. 

When you see C/P in the tut that means Copy and Paste.

Copy and paste desired papers into each layer.  Then delete the original layers. Add drop shadow of choice.

I used paper1 for right circle2 and left circle2. 

 Paper6 for circle3. Before de-selecting C/P close up tube. Hit delete. Change blend mode to screen, then de-select.

Paper13 re-size125% for thin rectangle3, 2 and 1.

Paper4 for circle1.

Paper1 for transmission oval.

C/P tube place to the right of template.

C/P elements of choice or use mine below. See my tag for exact placement.

If using the same the same tube her legs are cut off so I covered the bottom with the limo.

C/P limo re-size75% place over the bottom of your tube to cover her cut off legs.

C/P cuffs place upper left of template.

C/P sparkles place middle of tag.

C/P hat re-size65% place lower left side of template.

C/P martini place beside the hat.

C/P shoe re-size65% place in front of the hat and martini.

C/P ribbon3 mirror place on right side so that part is showing from behind the car.

C/P ribbon2 mirror place on top of ribbon3.

C/P gun re-size80% rotate left 35 degrees place under the handcuffs.

C/P bullets re-size60% place beside the gun.

C/P perfume re-size60% place beside martini and shoe.

C/P charm place right side of template.

C/P skull re-size80% place lower right of template beside the limo.

Crop merged opaque.

Merge visible. Re-size to desired size. Mine is 600 x 533. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on April 21, 2012


I would love to see what you create using my tuts, if you would like to share please email me your results at lynnkitten101@gmail. com , you never know if yours will get posted.

Thursday, April 19, 2012

Springtastic



This tutorial was written for those who have a working knowledge of psp.
I use paint shop 9, but any version should work.
All of my tutorials are of my own creations any similarity with any other tutorial is purely coincidental.Please do not copy my tutorials please link back to my blog!

SUPPLIES NEEDED

Tube of choice.
I am using artwork by ZlataM. A PTU Artist. You must purchase and obtain a license to use.  You can purchase this tube from SATC here.

Scrapkit PTU Spring Attitude by Bibi's Collection. You can purchase this kit here  

Font of choice. I used RonDRs Script
Filters needed:

eye candy5-impact-gradient glow(not required)used for name

Don't forget to save often.

LET'S GET STARTED

Open new image 700x700.
When you see C/P in the tut that means Copy and Paste.

C/P element12 re-size. Using your magic wand click inside of the frame. Selections-modify-expand by 8. C/P paper of choice or the one I used paper9. Selections-invert-hit delete. C/P close up of tube. Change blend mode to soft light or one to your liking. Selections-select none. Move under the frame.


C/P elements of choice or use mine below. See my tag for exact placement. Re-size to your liking.
C/P element68 duplicate 2x place in 3 different places on the  frame, see mine for placement
C/P element40 place in the middle of the frame 
C/P element37 place to the left of the frame duplicate and place to the right of the frame, to cover the whole bottom of the frame
C/P element9 place in middle of tag above element37
C/P element4 place in middle of tag above element9 
C/P element29 re-size place right side of the frame
C/P element2 place left side of the frame
C/P element38 place in middle of frame towards the bottom on the green part of the grass
C/P tube of choice place on the right side of the frame, if using the same one I did you will need to mirror it
C/P element17 re-size place in front of your tube to the right of the frame duplicate, re-size, mirror
C/P element88 re-size place in front of element17

Crop to size.

Merge visible. Re-size to desired size. Mine is 600x434. 

Add name or saying of choice. 

Add proper copyright info and save as .png
Thanks for trying my tutorial. I hope you enjoyed it.

This tutorial was written on April 19, 2012


I would love to see what you create using my tuts, if you would like to share please email me your results at lynnkitten101@gmail. com , you never know if yours will get posted.